Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who have lost their key to their car might be worried about the cost and hassle of acquiring a new one. There is a solution to avoid the expense of making your own key fob.
To do this, you'll require the flathead screwdriver. Insert the flathead screwdriver in the slot that is located in the middle of the case and slowly open it.
Cost
The majority of SAABs have two keys when they are new, but certain used cars only have one. In this situation, the owner must get a new key, and it is costly. There are a lot of ways to cut costs on this procedure. If you're only looking to replace the key fob case and not the emergency key or badge you could save money by buying a used case from a dealer. However, you should be aware that these cases do not include the badge or key for emergency use and are prone to wear out quickly.
In addition to the cost of buying a new key, you also have to pay for the installation and programming of the TWICE module. These costs can be expensive and especially if you don't have an extra.
It is essential that you always have at least two keys to your car. If you lose the only key, you won't be stranded without transportation.
The good news is that adding another key to your Saab 9-3 isn't as difficult as it might seem. The only problem is that you must connect the key to the car's computer. This can be accomplished by a dealer, but it can take some time to make an appointment. Luckily, you can find the information you need online to aid you with the process.
Installation
Most Saab cars built since 1995 have an immobilizer system that utilizes an electronic key fob to control the car's engine. This system also controls door locks and remote functions for the vehicle. It is important to have a spare key available to ensure that you don't lose the original and causing your car to be stolen. If you lose your only Saab working key, there are several ways to replace it without having to pay for costly dealer service.
First, you need to prepare the new keyfob. To do this, use an open-ended screwdriver to remove the case. Just insert the screwdriver in a small slot in the middle of the case and slowly work it. If you're having trouble, try using different angles. After you've opened up the case, you can remove the electronics and put them back in the new case.
You can begin the process of programming once you have the fob and key replacement. You will need to connect your Tech2 and then follow the steps for NG 9-3 either with or without the transponder. It is recommended to utilize a TWICE replacement unit that is already connected to the correct key by using an transponder. You can locate this type of unit on the internet, but you should make sure that the replacement is an OEM part.
Programming
A Tech 2 is required to include an additional key in the Saab 9-3. This also requires programming the vehicle to recognize the new keys. saab 93 key replacement is a much more complex procedure than simply copying a key made of metal. It must be done by a professional so as to not damage the electronic system of the vehicle. If you're thinking of adding the spare key to your vehicle, it's best to get it done as soon as possible. If you wait, you could end up paying more costs in the future.
In addition to adding an alternative key, you'll need to replace the CIM or TWICE module. This is typically an order-by-mail process and isn't something you can accomplish by contacting an aftermarket retailer. Depending on the car model, the cost can be quite expensive.
The dealer will charge the highest dollars to replace your car computer, but you have another option! S.A. Locksmith & Security will RE-Program your Saab computer to prepare it for the new key. This will reduce the cost of purchasing a new car computer. This service is quick and affordable, as well as simple. You could save up to 50% on the amount an auto dealer would charge. This is an excellent solution for people who have lost their car keys.
Remotes
The Saab 9-3 Viggen was among the most distinctive cars to ever sport the Saab badge. It was a Scandinavian front-drive fighter jet-inspired monster that was swift and enjoyable to drive. Many other Saab models were released, but none were as original.
It's crucial to replace your Saab 9-3's keys fob when you lose it. Unlike the more common European hot hatchbacks, Saab vehicles come with an immobilizer system that requires a special key to begin. If you have a spare, the replacement process is simple. But if you don't it could be costly and time-consuming.
You can save money when you purchase an old key fob replacement and have it programmed locally by a locksmith. Be careful when buying used keys from eBay and other online outlets. They might not be authentic and you may pay more in the end.
The removal of the battery and electronics from the old key fob is an easy procedure that anyone could do using a screwdriver with a small flathead. Be cautious not to scratch any of the tiny electronic components inside the case. Avoid pouring liquids into the case, as this could cause damage. Moreover, you should never buy a cloned key from any seller on the aftermarket because they may not work with the CIM of your vehicle.